Address : Plot 1 - A Cama Indl. Estate,
Phone : + 91 - 22 - 26852596
E-mail : info@ha-ko.com
Name :
E-mail :
Tel No :
Enquiry :
Ride on Models - Cylinder Blade

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Model Allett UK Buffalo -Ride-on
Engine 6HP B&S Petrol.
Blades 6 Blades carbon steel cylinder.
Cutting Width 34”.
Catcher heavy duty Plastic mold.
Cutting Height 8 - 40mm
  Ideal for sports ground, outfield etc.
Model Allett UK Regal -Ride-on
Engine 11HP B&S Petrol.
Blades 6 Blades carbon steel cylinder.
Cutting Width 42”.
Catcher heavy duty Plastic mold.
Cutting Height 7 - 44 mm
  Ideal for sports ground, outfield etc.
» C34 ride on cylinder blade professional mower with attachments
The C34 from Allett provides a wide range of professional grass maintenance requirements from one 34" machine. Each "easy-change" cartridge becomes an integral part of the machine with no compromise on its ability to perform the required function. Whether it be mowing, scarification, verti-cutting or sweeping, such versatility allows much greater seasonal use of the power unit increasing the value of the investment.

This superb lightweight sports ground mower is not only perfect for soccer pitches where compaction is a problem, but also for large areas of formal lawns, where the collection of grass and a beautiful striped effect are required. An optional trailing seat can be used to increase efficiency on larger areas. In common with all other Allett mowers, height and cutter adjustments are very easy on the C34.

Designed to run on low engine revs., the machine is very smooth, quiet and economical to operate.
The rear roller is in three sections and is rubber covered for good traction and silent running over hard surfaces. Internally, the rear roller is fitted with hardened steel differential gears, which run in a sealed oil bath. The optional trailing seat also has a rubber covered roller.

The mower has a low profile for good forward visibility. The C34 is very robust and both long life and easy servicing are assured.
Specifications:-
Cutting Width 34"
Engine Honda GX200 6.5hp Petrol
Overall Width 1168mm
Weight 164kg
Overall Length 1775mm
Overall Height 1020mm
Drive Clutch Handle mounted lever operating a tight and loose twin belts via a cable.
Cutter Clutch Handle mounted lever operating tight and loose triple belts via a cable.
Rear Roller Three piece steel sections, rubber covered.
Differential Hardened steel gears running in a sealed oil bath.
Front Roller Aluminium running on sealed bearings.
Handle Bar Adjustable with anti vibration mounts.
Grassbox Rotationally moulded plastic with steel reinforcing strip.
Optional Extra Trailing Seat
Cartridge Options
6 Blade Cylinder (CC346)
Weight 43kg
Working Width 863mm
Overall Width 978mm
Rate of Cut 94 Cuts per metre (86 cuts per yard - 2.39 cuts per inch)
Cylinder All welded, high carbon steel Hardened and tempered to 45HRC.
Bottom Blade Manufactured from EN8, hardened and tempered to 45HRC.
Height of Cut 8mm to 55mm
8 Blade Cylinder (CC348)
Weight 45kg
Working Width 863mm
Overall Width 978mm
Rate of Cut 125 Cuts per metre (114 cuts per yard - 3.18 cuts per inch)
Cylinder All welded, high carbon steel Hardened and tempered to 45HRC.
Bottom Blade Manufactured from EN8, hardened and tempered to 45HRC.
Height of Cut 8mm to 55mm
Scarifier (C34SC)
scarifier
38 High carbon spring steel blades at 20mm spacing.
Weight 29kg
Working Width 863mm
Overall Width 978mm
Verticut (C34SL)
52 High carbon spring steel blades at 15mm spacing.
Weight 30kg
Working Width 863mm
Overall Width 978mm
Brush (C34B)
6 rows of 1.25mm Polypropylene bristles.
Weight 25kg
Working Width 863mm
Overall Width 978mm
Turf Tropper